Skip to main content
Mikrotik CRS328-24P-4S+RM

Mikrotik CRS328-24P-4S+RM

Mikrotik

$900.50
Write a Review
SKU:
CRS328-24P-4S+RM
Architecture:
ARM 32-Bit
CPU:
98DX3236
CPU core count:
1
CPU nominal frequency:
800MHz
RouterOS License level:
5
Operating System:
RouterOS / SwitchOS
Size of RAM:
512MB
Storage size:
16MB
Storage Type:
Flash
Tested ambient temperature:
-20C to +60C
PoE out:
802.3af/at
PoE-out ports:
Ether1-Ether24 (24)
Number of AC inputs:
1
AC input range:
100-240v
Max out per port output (input > 30 V):
450 mA
Max out per port output (input < 30 V):
1000 mA
Max total out (A):
20 A
Max power consumption:
494W
Max power consumption without attachments:
44W
10/100/1000 Ethernet ports:
24
SFP+ ports:
4
Serial port:
RJ45
CPU temperature monitor:
Yes
PCB temperature monitor:
Yes
Mode button:
Yes
Adding to cart… The item has been added

CRS328-24P-4S+RM is a 28 independent port switch, it has 24 Gigabit Ethernet ports, which offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing. PoE-Out is passed over mode B pins (4,5+)(7,8-). The four SFP+ ports provide up to 10 Gbps connectivity options via either optical fiber or Ethernet modules (not included).

CRS328-24P-4S+RM comes in a 1U rackmount case with 100-240 V AC 500 W power supply built-in. The device consumes up to 44 W leaving guaranteed 450 W (3x150 W per every 8 Ethernet ports) to power your PoE devices. Each port can provide up to 30 W of power with any power output option you choose.

The device has a “Dual boot” feature that allows you to choose between two operating systems - RouterOS or SwOS. If you prefer to have a simplified operating system with only switch specific features, use SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. All the feature set comes with disruptive price, providing best price/performance on the market.

**Due to COVID-19, Stock of this item may be limited. Please Contact Us (https://shop.gigafy.com.au/contact-us/) to see if any stock is available.**

Switching results

CRS328-24P-4S+RM 
ModeConfiguration1518 byte512 byte64 byte
kppsMbpskppsMbpskppsMbps
Switching Non blocking Layer 2 throughput 5,201.6 63,167.8 15,037.6 61,594.0 95,238.1 48,761.9
Switching Non blocking Layer 2 capacity 5,201.6 126,335.5 15,037.6 123,188.0 95,238.1 97,523.8
Switching Non blocking Layer 1 throughput 5,201.6 64,000.0 15,037.6 64,000.0 95,238.1 64,000.0
Switching Non blocking Layer 1 capacity 5,201.6 128,000.0 15,037.6 128,000.0 95,238.1 128,000.0

Ethernet test results

CRS328-24P-4S+RM 98DX3236 all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 104,3 1266.6 273,5 1120.3 449 229.9
Bridging 25 bridge filter rules 104 1263.0 104,6 428.4 104,5 53.5
Routing none (fast path) 104,3 1266.6 273,9 1121.9 343,5 175.9
Routing 25 simple queues 104,3 1266.6 136,9 560.7 137,4 70.3
Routing 25 ip filter rules 64,8 786.9 65,9 269.9 65,8 33.7
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
!